Hydro-excavation is a process that utilizes water jets to break up and remove soil via air conveyance (vacuum) into a debris tank, providing a non-destructive means to locate utilities and precisely excavate an area.

Safety and Cost Benefits

• Get precise and accurate soil removal
• Save both labor hours and expensive heavy equipment costs
• Avoid risks of costly and dangerous damage to existing facilities

*Each of these assemblies is jetted to match your pump’s pressure and flow.

The Waterjet Technology Association recommends limiting the thrust on hand held
jetting applications to no more than 1/3 of the operator’s weight.

Click to view HYDRO-X Jetting Chart.
Contact our Customer Service Team with jetting questions.

Product Information

The new WHP-3/4 has been designed to produce more thrust than existing tools available today. The rear facing jets have been angled more sharply and the centralizer fins have been trimmed back.

The result is more pulling power to handle longer lines, extra distance and moderate inclines. It features 3 nozzle ports, including a boring jet offset at 15 degrees, and 2 jets at 162 degrees. The inlet port comes in either 3/4” npt or BSPP.

Introducing a cost-effective way to clean manholes.

Exceptional Value
Nothing beats a Warthog for superior overall performance and low cost of ownership. The easily adaptable design of the WG-1 can save you up to 50% over buying a separate tool for the job.

Simple Conversion
The conversion is simple and requires exchanging the standard WG 040 head with our Manhole Cleaner head. The benefit of using this design is that the jets are directed at the manhole walls at all times, which makes it safer and much more effective than other style tools.

The WD 1-1/4 is designed to handle the same applications as the WG-1 Classic but at higher flows. The 1-1/4” inlet combined with 7 ports effectively distribute more water.

Descaling heads are not available for this model.

Product Information

Our new WGP-1 is designed to produce up to 40% more pulling power than our WG-1 Classic. The rear facing jets are angled more sharply and the centralizer fins have been streamlined. We’ve also added two more centralizer fins for a total of six.

The result is more pulling power to navigate longer lines and moderate inclines, plus easier retrieval of the tool. It features 5 jet ports, with a boring jet offset at 15˚ and four jets at 155˚, plus the inlet port is available in either 1” NPT or BSPP. This tool will greatly benefit contractors with operating pressures of 2,500 psi or less (172 bar or less).

Warthog WG-1 Extensions & Centralizer Demo

Product Information

We offer three larger WARTHOG models to handle municipal, industrial and commercial drain cleaning applications. By installing replaceable AP2 nozzle tips that are sized to maximize the efficiency and effectiveness of your pump, these tools are highly productive. They eliminate the need for using several types of specialty tools to complete the job.

The WG-1 Classic is the proven choice for municipalities who are faced with cleaning pipes from 8”-36” (203-914 mm). Large combination trucks with 1” hose use this tool predominately. Municipalities around the world rely on this tool to handle their biggest challenges. Descaling head options are also available.

The WH-1/2 and the WH-3/4 are the same tool but offered with different inlet port sizes to match either 1⁄2” or 3⁄4” npt. The WH models are best for 6”-18” lines. These tools are most commonly used with small capacity combination trucks & large trailer jetters.

Descaling Heads

Descaling Heads are available on both WH models.

The Industry Standard for Commercial and Residential Sewer Cleaning

The WS-1/2 is designed to handle 4”-8” lines and is most commonly used with trailer jetters. Operators use these tools to clean lines in restaurants, hospitals, multi-story apartment buildings, residential, and other applications. You can expect to remove grease, cut roots, ice and soil blockages. It is also available in a 1/2” BSPP inlet option.

Jointed Model

These jointed options allow the inlet hose to bend to the side which shortens the rigid length of the tool and makes access into clean outsand limited access applications much easier. Inlet ports for this model are available in either a 1/2” NPT or BSPP.

Optional P8 Inlet

The WS-P8 is an excellent option for straight pipes. The need for a whip hose is eliminated, allowing you to connect the hose directly to the tool. It is available with a female 1/2” NPT or BSPP connection. In this configuration 4” 90˚ bends are no longer negotiable.

Product Information

Our smaller WARTHOG models have all the powerful features of the larger tools but can negotiate elbows and clean-outs commonly found in laterals at homes, buildings restaurants and other light commercial facilities. The WT-3/8-C is designed specifically to handle 3”-6” lines and clean-outs. This tool is most commonly used on small capacity pumps and cart jetters. We’ve added permanent carbide buttons to the WT-3/8-C model, specifically designed to handle demanding applications.

Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous models. It also features replaceable AP2 nozzles.